Welcome to Wuxi Sairui Metal Powder Manufacture Co.Ltd
Tel: (0086)510-83451589
Product Categories
Contact Us

Wuxi Sairui Metal Powder Manufacture Co.Ltd

Add:Beizhuang Village, Qianzhou Street, Huishan District, Wuxi, Jiangsu, China

Con:Zhaolin Zhou(General Manager)

Tel:(0086)510-83451589

Pho:(0086)13382028555

Fax:(0086)510-83451589

E-mail:973052069@qq.com

Web:www.wxsairui.com

News
Home > News > Content

Several Processes Of Metal Abrasives In Ceramic Preparation

Several Processes of Metal Abrasives in Ceramic Preparation
As we all know, the Metal Abrasives process is often widely used to produce metal powder, but this process is also essential in the ceramic production process. Today for everyone to analyze it! From the process point of view, according to the performance of ingredients and water content of the different, the ceramic forming method is divided into three categories, both grouting, plastic forming, pressing forming.
Grouting: The principle of grouting is to absorb moisture from the mud with the capillary suction of the gypsum mold, so that the mud forms a mud layer on the mold wall and becomes a young embryo. After further evaporation and drying, the mold can be stripped. The principle of press forming is basically the same as that of Metal Abrasives steel mold pressing and isostatic pressing.
Grouting: The use of fluid moisture up to more than 30 percent of the fluid slurry, by pouring in the gypsum mold or porous mold forming. Hot-press forming is also grouting forming, the difference is that he is mixed with paraffin wax, the use of paraffin heat flow characteristics, making the metal mold under pressure to form, after condensation to obtain embryo body method.
Plastic molding The use of the embryo is a plastic state of your group, it is both the ancient forming methods, but also the most form of change in the form of forming with the shape: to meet the surface smooth, ultra-thin ceramic products forming requirements, such as The circuit material in the integrated circuit has developed a belt forming method. The belt forming method is divided into casting method and sheet extrusion method. The former molding of the embryo for the slurry-like, after you like the group. General use of the extension method.
With the development of the economy, the progress of our living standards, the development of the automotive industry is also growing higher and higher. Now the car's fuel is reduced, the amount of sewage is reduced, the weight of the car body becomes lighter, the function becomes more, these changes are benefited from the development of Metal Abrasives technology. Metal Abrasivess in the car continue to be used, even every car has 5 kg of Metal Abrasives. The use of Metal Abrasivess in the proposed machine, but also reduce the temperature of the proposed machine, the use of lead and copper Metal Abrasives made of the valve seat, the thermal conductivity can be improved 2.5 times, but the temperature can be reduced by 70 degrees. There is also a Metal Abrasives is a titanium alloy Metal Abrasives, the use of this Metal Abrasives can reduce the weight of the car, increasing the life of the car. Titanium alloy This material has many advantages, its low cost, low price, the use of the car can also reach the accuracy of the car request. Now we have a technique in the car that is used in the car to synchronize the cone-ring technology, which is used in the gearbox. Assuming that the sync cone ring is damaged, the vehicle can not be variable during the process of driving, very risky. Automobile synchronous cone ring technology requirements of the exceptionally high precision, tolerance also pleads exceptionally good, need to use some surface induction hardening, so that the tooth root hardness can reach 74HRA above, hardened layer depth of 2MM. Metal Abrasives technology for all cars, although not the protagonist, but not the technology, then it is not possible.

Wuxi Sairui Metal Powder Manufacture Co.Ltd